Mechanic and Water/Vaqua(Vapour) Blasting

Hi there, anyone know where about in Sydney I can find someone who are able to Vaqua/Vapour Blasting or similar to engine, carbs etc.? Also need to find out any good mechanic around in Sydney who knows about GPZ? Thanks.

Last edited by GPZ900R on Fri Jul 17, 2009 1:05 pm, edited 1 time in total.

Do it yourself

http://www.aircooledtech.com/tools-on-t ... a_blaster/

Not quite Sydney but talk to Martin at Hyside. www.hyside.com.au
Has a vacqua and is also mechanic

Do it yourself

http://www.aircooledtech.com/tools-on-t ... a_blaster/

Thanks Rossi. Had a look and that was fantastic.... awesome!

Not quite Sydney but talk to Martin at Hyside. http://www.hyside.com.au
Has a vacqua and is also mechanic

Thanks S&W. Will find out more from him.

Get yourself a manual and some basic tools and rip it apart. Use the internets to source the answer to any questions you have and if you need parts restored to as showroom condition then just ask. Martin has a vacqua and can blast your cases - I think $70ph is the going rate - I can polish any parts you have for $35 ph - ludicrously cheap. Plating can be arranged also whether it be Zinc, chrome or nickle. Perhaps a one off Pete Gibson exhaust and some Hagon shocks?

Get yourself a manual and some basic tools and rip it apart. Use the internets to source the answer to any questions you have and if you need parts restored to as showroom condition then just ask. Martin has a vacqua and can blast your cases - I think $70ph is the going rate - I can polish any parts you have for $35 ph - ludicrously cheap. Plating can be arranged also whether it be Zinc, chrome or nickle. Perhaps a one off Pete Gibson exhaust and some Hagon shocks?

That sound good. But you're in Melbourne right? Is Martin based in NSW or VIC?

Get yourself a manual and some basic tools and rip it apart. Use the internets to source the answer to any questions you have and if you need parts restored to as showroom condition then just ask. Martin has a vacqua and can blast your cases - I think $70ph is the going rate - I can polish any parts you have for $35 ph - ludicrously cheap. Plating can be arranged also whether it be Zinc, chrome or nickle. Perhaps a one off Pete Gibson exhaust and some Hagon shocks?

That sound good. But you're in Melbourne right? Is Martin based in NSW or VIC?

Martin is in Central Vic and has loads of stuff posted to him . Give him a call 0403 836266 and ask him about sending stuff down and ideas of costs .
If he cant do it at a cost effective rate he will let you know where you can get stuff done .
Make mention Adrian and Billy and he will either look after you or tell you to F%^K OFF !

Get yourself a manual and some basic tools and rip it apart. Use the internets to source the answer to any questions you have and if you need parts restored to as showroom condition then just ask. Martin has a vacqua and can blast your cases - I think $70ph is the going rate - I can polish any parts you have for $35 ph - ludicrously cheap. Plating can be arranged also whether it be Zinc, chrome or nickle. Perhaps a one off Pete Gibson exhaust and some Hagon shocks?

That sound good. But you're in Melbourne right? Is Martin based in NSW or VIC?

Martin is in Central Vic and has loads of stuff posted to him . Give him a call 0403 836266 and ask him about sending stuff down and ideas of costs .
If he cant do it at a cost effective rate he will let you know where you can get stuff done .
Make mention Adrian and Billy and he will either look after you or tell you to F%^K OFF !

that's fair enough Thanks.