Page 1 of 2

Advice needed again

PostPosted: Thu Mar 23, 2006 4:51 pm
by ZX10R King
How hard is it to change front brake and clutch levers? I have bid on some carbon look ones on ebay

PostPosted: Thu Mar 23, 2006 5:09 pm
by Gosling1
In the aussie vernacular..........its a piece of piss mate !!

you need to back-off the adjuster on the clutch cable first, so you get as much free-play as possible at the lever end - this will allow you to pull the 'outer' out from the adjuster, slip the nipple out of the lever........then undo the lever pivot bolt, remove old shitty non-carbon-look lever, and replace with new shitty carbon-look lever .......assembly is reverse of dissasembly...

even easier on brake side, its just undo the pivot bolt. remove shitty lever, and replace with new mega-HP lever .......carbon-fibre look is *The Go* mate, for a blingalicious bike.........

8)

PostPosted: Thu Mar 23, 2006 5:48 pm
by mike-s
OI! watch who's nipple your slipping there Gos!

PostPosted: Thu Mar 23, 2006 5:55 pm
by ZX10R King
*pic added above*

PostPosted: Thu Mar 23, 2006 5:58 pm
by Gosling1
:lol: :lol: and Lars thought it vas ze girlz at Cowes :shock: :shock: :lol:

He vus wronk !!

8)

PostPosted: Thu Mar 23, 2006 6:47 pm
by Damon Z1000
OMG :shock:

PostPosted: Thu Mar 23, 2006 8:13 pm
by Smitty
Gosling1 wrote:In the aussie vernacular..........its a piece of piss mate !!

you need to back-off the adjuster on the clutch cable first, so you get as much free-play as possible at the lever end - this will allow you to pull the 'outer' out from the adjuster, slip the nipple out of the lever........then undo the lever pivot bolt, remove old shitty non-carbon-look lever, and replace with new shitty carbon-look lever .......assembly is reverse of dissasembly...

even easier on brake side, its just undo the pivot bolt. remove shitty lever, and replace with new mega-HP lever .......carbon-fibre look is *The Go* mate, for a blingalicious bike.........

8)


as Gos sez...spot on mate

I got my CF levers for the 12r orf a bloke on eBay
...about $70 for the two (plus post)

bloody good value if you ask me....

PostPosted: Thu Mar 23, 2006 8:15 pm
by ZX10R King
cool, so far these are sitting at $49.95. Only a few days to go

PostPosted: Thu Mar 30, 2006 3:50 pm
by ZX10R King
OK, well I lost the bid a couple of days ago, but was just re offered item, due to non payment of bidder....Picked 'em up for $49.95 + postage.....I am happy :lol:

PostPosted: Thu Mar 30, 2006 3:52 pm
by Stereo
Gosling1 wrote::lol: :lol: and Lars thought it vas ze girlz at Cowes :shock: :shock: :lol:

He vus wronk !!

8)


Ooooh... he's one of those german sweedes?

PostPosted: Fri Mar 31, 2006 8:20 am
by chameleon
hey king, you get a copy of ya manual yet? Should be an online one around here someplace.

PostPosted: Fri Mar 31, 2006 3:27 pm
by ZX10R King
chameleon wrote:hey king, you get a copy of ya manual yet? Should be an online one around here someplace.


No, I been way too busy to look for those things :lol:

PostPosted: Fri Mar 31, 2006 6:24 pm
by SocialSecurity
theres nothing so tacky in this world as fake carbon fibre :P

PostPosted: Fri Mar 31, 2006 8:54 pm
by Gosling1
SocialSecurity wrote:theres nothing so tacky in this world as fake carbon fibre :P


hmmm, I reckon 'Abo Chrome' is right up there ......... :wink:

:D

PostPosted: Sat Apr 01, 2006 1:57 pm
by ZZRCHIKKY
ok i think i understood three words in that explintation but i know how to do it , so if u fly me to brissy ill do it for u :P