Advice needed again

For general Technical and Performance Discussions

Advice needed again

Postby ZX10R King » Thu Mar 23, 2006 4:51 pm

How hard is it to change front brake and clutch levers? I have bid on some carbon look ones on ebay
Last edited by ZX10R King on Thu Mar 23, 2006 5:51 pm, edited 1 time in total.
SXC in black, '05 ZX10R

Image
ZX10R King
KSRC Contributor
KSRC Contributor
 
Posts: 1062
Joined: Sun Oct 30, 2005 5:49 am
Location: Coorparoo, Brisbane

Postby Gosling1 » Thu Mar 23, 2006 5:09 pm

In the aussie vernacular..........its a piece of piss mate !!

you need to back-off the adjuster on the clutch cable first, so you get as much free-play as possible at the lever end - this will allow you to pull the 'outer' out from the adjuster, slip the nipple out of the lever........then undo the lever pivot bolt, remove old shitty non-carbon-look lever, and replace with new shitty carbon-look lever .......assembly is reverse of dissasembly...

even easier on brake side, its just undo the pivot bolt. remove shitty lever, and replace with new mega-HP lever .......carbon-fibre look is *The Go* mate, for a blingalicious bike.........

8)
".....shut the gate on this one Maxie......it's the ducks guts !!............."
User avatar
Gosling1
Team Donut
Team Donut
 
Posts: 13823
Joined: Mon Jun 20, 2005 9:30 pm
Location: Anarchy Road
Bike: Z900
State: ACT

Postby mike-s » Thu Mar 23, 2006 5:48 pm

OI! watch who's nipple your slipping there Gos!
Image
If it hurts, you aren't doing it right.
User avatar
mike-s
Apprentice Post Whore :-)
Apprentice Post Whore :-)
 
Posts: 6142
Joined: Sat Aug 07, 2004 5:43 am
Location: Arncliffe, Sydney
Bike: Suzuki
State: New South Wales

Postby ZX10R King » Thu Mar 23, 2006 5:55 pm

*pic added above*
SXC in black, '05 ZX10R

Image
ZX10R King
KSRC Contributor
KSRC Contributor
 
Posts: 1062
Joined: Sun Oct 30, 2005 5:49 am
Location: Coorparoo, Brisbane

Postby Gosling1 » Thu Mar 23, 2006 5:58 pm

:lol: :lol: and Lars thought it vas ze girlz at Cowes :shock: :shock: :lol:

He vus wronk !!

8)
".....shut the gate on this one Maxie......it's the ducks guts !!............."
User avatar
Gosling1
Team Donut
Team Donut
 
Posts: 13823
Joined: Mon Jun 20, 2005 9:30 pm
Location: Anarchy Road
Bike: Z900
State: ACT

Postby Damon Z1000 » Thu Mar 23, 2006 6:47 pm

OMG :shock:
Watch This Space.......I Told You Didn't I?

Officially Honoury Member NWSHCIAVANEWFARKINBIKE 2009.

Team Crash 2010 Ooooops
User avatar
Damon Z1000
KSRC Contributor
KSRC Contributor
 
Posts: 1617
Joined: Sun Oct 10, 2004 4:13 pm
Location: Bligh Park NSW
Bike: Z1000
State: New South Wales

Postby Smitty » Thu Mar 23, 2006 8:13 pm

Gosling1 wrote:In the aussie vernacular..........its a piece of piss mate !!

you need to back-off the adjuster on the clutch cable first, so you get as much free-play as possible at the lever end - this will allow you to pull the 'outer' out from the adjuster, slip the nipple out of the lever........then undo the lever pivot bolt, remove old shitty non-carbon-look lever, and replace with new shitty carbon-look lever .......assembly is reverse of dissasembly...

even easier on brake side, its just undo the pivot bolt. remove shitty lever, and replace with new mega-HP lever .......carbon-fibre look is *The Go* mate, for a blingalicious bike.........

8)


as Gos sez...spot on mate

I got my CF levers for the 12r orf a bloke on eBay
...about $70 for the two (plus post)

bloody good value if you ask me....
GOTTA LUV the 12R!!
User avatar
Smitty
VIP MEMBER
VIP MEMBER
 
Posts: 10910
Joined: Wed Apr 21, 2004 1:59 pm
Location: 3rd rock from the Sun
Bike: ZX12R
State: Victoria

Postby ZX10R King » Thu Mar 23, 2006 8:15 pm

cool, so far these are sitting at $49.95. Only a few days to go
SXC in black, '05 ZX10R

Image
ZX10R King
KSRC Contributor
KSRC Contributor
 
Posts: 1062
Joined: Sun Oct 30, 2005 5:49 am
Location: Coorparoo, Brisbane

Postby ZX10R King » Thu Mar 30, 2006 3:50 pm

OK, well I lost the bid a couple of days ago, but was just re offered item, due to non payment of bidder....Picked 'em up for $49.95 + postage.....I am happy :lol:
SXC in black, '05 ZX10R

Image
ZX10R King
KSRC Contributor
KSRC Contributor
 
Posts: 1062
Joined: Sun Oct 30, 2005 5:49 am
Location: Coorparoo, Brisbane

Postby Stereo » Thu Mar 30, 2006 3:52 pm

Gosling1 wrote::lol: :lol: and Lars thought it vas ze girlz at Cowes :shock: :shock: :lol:

He vus wronk !!

8)


Ooooh... he's one of those german sweedes?
The world is round. It has no point.
User avatar
Stereo
KSRC Addict
KSRC Addict
 
Posts: 4578
Joined: Thu Aug 11, 2005 8:01 am
Location: Pt Cook, Melbourne, Victoria, Australia, Pacific Ocean, Earth
Bike: ZX10R
State: Victoria

Postby chameleon » Fri Mar 31, 2006 8:20 am

hey king, you get a copy of ya manual yet? Should be an online one around here someplace.
Image
chameleon
KSRC Regular
KSRC Regular
 
Posts: 763
Joined: Sat Nov 26, 2005 8:38 am
Location: Briso

Postby ZX10R King » Fri Mar 31, 2006 3:27 pm

chameleon wrote:hey king, you get a copy of ya manual yet? Should be an online one around here someplace.


No, I been way too busy to look for those things :lol:
SXC in black, '05 ZX10R

Image
ZX10R King
KSRC Contributor
KSRC Contributor
 
Posts: 1062
Joined: Sun Oct 30, 2005 5:49 am
Location: Coorparoo, Brisbane

Postby SocialSecurity » Fri Mar 31, 2006 6:24 pm

theres nothing so tacky in this world as fake carbon fibre :P
if your going to kill a bronze, you gotta do it BIG!
SocialSecurity
KSRC Regular
KSRC Regular
 
Posts: 722
Joined: Tue Jun 15, 2004 2:00 pm
Location: melb, east bentleigh
Bike: Suzuki
State: Western Australia

Postby Gosling1 » Fri Mar 31, 2006 8:54 pm

SocialSecurity wrote:theres nothing so tacky in this world as fake carbon fibre :P


hmmm, I reckon 'Abo Chrome' is right up there ......... :wink:

:D
".....shut the gate on this one Maxie......it's the ducks guts !!............."
User avatar
Gosling1
Team Donut
Team Donut
 
Posts: 13823
Joined: Mon Jun 20, 2005 9:30 pm
Location: Anarchy Road
Bike: Z900
State: ACT

Postby ZZRCHIKKY » Sat Apr 01, 2006 1:57 pm

ok i think i understood three words in that explintation but i know how to do it , so if u fly me to brissy ill do it for u :P
owwww me lubs my dr 650 WOOOOOOOOOOOOOT
User avatar
ZZRCHIKKY
KSRC Contributor
KSRC Contributor
 
Posts: 1085
Joined: Sat Nov 05, 2005 7:07 pm
Location: G Town , Tasmania
Bike: Ducati
State: Queensland

Next

Return to General Tech & Performance Talk

Who is online

Users browsing this forum: No registered users and 8 guests