tail risers

For general Technical and Performance Discussions

tail risers

Postby 98ninja » Sun Aug 07, 2005 7:13 pm

i have a c-model zx9r and im looking for some modifications to make to it
so does anyone here have any knowledge or opinions of tail risers?
http://www.amcmotorcycles.com/contents/en-uk/d33.html
im not 100% sure i want to install something like this if its going to have more cons than pros
User avatar
98ninja
KSRC Regular
KSRC Regular
 
Posts: 692
Joined: Fri Jul 22, 2005 6:08 pm
Location: Inverell
Bike: ZX9R
State: New South Wales

Postby hammer » Sun Aug 07, 2005 8:59 pm

If it just the look your after don`t buy one. It will quicken your steering but make the bike head shake and be unstable at speed.
30mm is a fair lift and you will probably end up needing a steering damnper.

Stu
Ride it like you hate it
User avatar
hammer
Team Black
 
Posts: 437
Joined: Wed Nov 03, 2004 9:01 am
Location: Brisbane
Bike: It's not worth Mentioning
State: Queensland

Postby Neilp » Sun Aug 07, 2005 9:00 pm

Be careful with AMC I have had dealings with them, where they sent me the wrong part and it took nearly three months to sort out.


Neil
8) 8) 8)
Neilp
KSRC Regular
KSRC Regular
 
Posts: 545
Joined: Thu Sep 23, 2004 10:44 am
Location: Brisbane
Bike: ZZR1200
State: Queensland

Postby Nanna10r » Mon Aug 08, 2005 2:45 am

Stu is My protractor Specialist ...... so what he said.

Cheers Brett
"Nan & Pop Racing"
Poppy Hops on .... CBR150 (Superlite) CBR954 "Blade"
Nanna Naps on .... MoriWAKI NSR85 (Motolite) ZX10R "Crim"
We may ride like Old Can'ts, But Phuk we look DOOG !!!!!!
User avatar
Nanna10r
Team Ninja
 
Posts: 4291
Joined: Wed Jul 14, 2004 10:42 pm
Location: Brisbane Australia
Bike: ZX10R
State: Queensland

Postby 98ninja » Mon Aug 08, 2005 5:33 am

ive already got a steering dampner on.
really needed it after i changed from a 190 rear tyre to a 180.
apparently 180 is standard for the zx9r but above road legal speeds i still have some headshake even with the dampner.
maybe the 190 is the way to go for rear tyre in the future.
yeah it was just a passing interest thanks for the feedback
User avatar
98ninja
KSRC Regular
KSRC Regular
 
Posts: 692
Joined: Fri Jul 22, 2005 6:08 pm
Location: Inverell
Bike: ZX9R
State: New South Wales

Postby Nanna10r » Mon Aug 08, 2005 7:50 am

As well as fitting the 190, have you changed the geometry at all ?. The 9's aren't noted for their headshaking abilities. If your looking to mod her up to Spec, maybe you could go for an "F" model swingarm as that was the big chnage from the previous models.

Cheers Brett
"Nan & Pop Racing"
Poppy Hops on .... CBR150 (Superlite) CBR954 "Blade"
Nanna Naps on .... MoriWAKI NSR85 (Motolite) ZX10R "Crim"
We may ride like Old Can'ts, But Phuk we look DOOG !!!!!!
User avatar
Nanna10r
Team Ninja
 
Posts: 4291
Joined: Wed Jul 14, 2004 10:42 pm
Location: Brisbane Australia
Bike: ZX10R
State: Queensland

Postby 98ninja » Mon Aug 08, 2005 1:56 pm

its all standard i havent changed anything
and i only really get headshake at 250+ so i shouldnt really complain
User avatar
98ninja
KSRC Regular
KSRC Regular
 
Posts: 692
Joined: Fri Jul 22, 2005 6:08 pm
Location: Inverell
Bike: ZX9R
State: New South Wales

Postby hammer » Mon Aug 08, 2005 6:45 pm

98ninja wrote:its all standard i havent changed anything
and i only really get headshake at 250+ so i shouldnt really complain


I think you need phil`s or bretts input on this they are the only zx9 men that ride at such speed :shock: .
Ride it like you hate it
User avatar
hammer
Team Black
 
Posts: 437
Joined: Wed Nov 03, 2004 9:01 am
Location: Brisbane
Bike: It's not worth Mentioning
State: Queensland

Postby Nanna10r » Mon Aug 08, 2005 9:50 pm

hammer wrote:
98ninja wrote:its all standard i havent changed anything
and i only really get headshake at 250+ so i shouldnt really complain


I think you need phil`s or bretts input on this they are the only zx9 men that ride at such speed :shock: .


Dont listen to him mate he's a BIG fibber, the 03 9r Hammer had was the quickest thing that has been at the next intersection waiting for me/us.
Would a made a good trackie Stu hows the "mower blade" coming along ? :wink:
As for Phil ... dont start me on that one :shock: But obviously 10r's shouldnt go out to Nasho if they wanna save their riders dignity from coping a hammer from fat ole' 9r with a bag on the back.
cheers Brett
"Nan & Pop Racing"
Poppy Hops on .... CBR150 (Superlite) CBR954 "Blade"
Nanna Naps on .... MoriWAKI NSR85 (Motolite) ZX10R "Crim"
We may ride like Old Can'ts, But Phuk we look DOOG !!!!!!
User avatar
Nanna10r
Team Ninja
 
Posts: 4291
Joined: Wed Jul 14, 2004 10:42 pm
Location: Brisbane Australia
Bike: ZX10R
State: Queensland

Postby 98ninja » Tue Aug 09, 2005 7:04 pm

i had a b model zx9r before the c model
was looking to upgrade to either a tlr1000 or a newer zx9r
about 5 shops (out of 5) told me zx9r c model has it all over tlr in handling ,hp and accelaration. in fact i was told the zx9r had the fastest 0-150 of any road legal bike from 1998 to 2002. can anyone else confirm this? also i heard the c1 model was the fastest zx9r ever made because of the shorter stroke engine. again can anyone else confirm this?
after all of this advice all i can say is the 9s are a badass bike and im hoping the 10 is even more badass when i buy one
User avatar
98ninja
KSRC Regular
KSRC Regular
 
Posts: 692
Joined: Fri Jul 22, 2005 6:08 pm
Location: Inverell
Bike: ZX9R
State: New South Wales

Postby hammer » Tue Aug 09, 2005 8:47 pm

Tlr was a bit of a flop,the motor( the gearbox is better than a c1 thats for sure) was a good thing but it was a bit to heavy. Power would be similar to your 9.
Nar not the fastest and not the fastest 9 either.
The zx10 is way way more badass than your 9

Stu
Ride it like you hate it
User avatar
hammer
Team Black
 
Posts: 437
Joined: Wed Nov 03, 2004 9:01 am
Location: Brisbane
Bike: It's not worth Mentioning
State: Queensland

Postby 98ninja » Tue Aug 09, 2005 10:32 pm

i looked up the stats but i dont know which sites to believe
most had
tlr - 125hp and 250ishkgs wet
zx9r c1 - 145hp or 155hp with ram air and 205ish wet
i thought id try out a v twin but in the end i went for what i knew
User avatar
98ninja
KSRC Regular
KSRC Regular
 
Posts: 692
Joined: Fri Jul 22, 2005 6:08 pm
Location: Inverell
Bike: ZX9R
State: New South Wales

Postby Nanna10r » Tue Aug 09, 2005 11:26 pm

In 02 the 9r was the quickest litre bike of the jap bikes over the quarter(easier to launch without wheelstanding) & boasted highest top speed as well (air ram).

http://sportrider.com/bikes/146_perf_nums/

But compared to the new group of thous' its a pretty nice tourer :wink:

V twins sound great with after market pipes & ......... ? 8)

Cheers Brett
"Nan & Pop Racing"
Poppy Hops on .... CBR150 (Superlite) CBR954 "Blade"
Nanna Naps on .... MoriWAKI NSR85 (Motolite) ZX10R "Crim"
We may ride like Old Can'ts, But Phuk we look DOOG !!!!!!
User avatar
Nanna10r
Team Ninja
 
Posts: 4291
Joined: Wed Jul 14, 2004 10:42 pm
Location: Brisbane Australia
Bike: ZX10R
State: Queensland

Postby MickLC » Wed Aug 10, 2005 11:15 am

98ninja wrote:...after all of this advice all i can say is the 9s are a badass bike and im hoping the 10 is even more badass when i buy one


Believe me, it is :twisted:
'13 Z1000, '76 Z650+,'91 KLR250, '95 ZX6R Racebike
User avatar
MickLC
Team Crim
 
Posts: 5429
Joined: Wed Apr 21, 2004 1:04 pm
Bike: Z1000
State: ACT

Postby hammer » Wed Aug 10, 2005 5:31 pm

Pontikat wrote:In 02 the 9r was the quickest litre bike of the jap bikes over the quarter(easier to launch without wheelstanding) & boasted highest top speed as well (air ram).

http://sportrider.com/bikes/146_perf_nums/

But compared to the new group of thous' its a pretty nice tourer :wink:

V twins sound great with after market pipes & ......... ? 8)

Cheers Brett


What bout the gsxr 1000? or are we only talkin kawa?
Didnt relize we were talkin bout little bikes :lol:
Ride it like you hate it
User avatar
hammer
Team Black
 
Posts: 437
Joined: Wed Nov 03, 2004 9:01 am
Location: Brisbane
Bike: It's not worth Mentioning
State: Queensland

Next

Return to General Tech & Performance Talk

Who is online

Users browsing this forum: No registered users and 6 guests

cron