05 ZX6R 636 Front Rotors

For general Technical and Performance Discussions

05 ZX6R 636 Front Rotors

Postby Caleb636 » Mon Apr 29, 2013 3:33 pm

Hey All

My discs are warped and i don’t want to spend $400 each side for OEM to replace them.

I’m looking at these...

http://www.s3performance.com.au/front-b ... -3383.html

Has anyone used these before? Or can someone recommend me something else that not off the show expensive?
Caleb636
Newbie
 
Posts: 2
Joined: Mon Jan 21, 2013 4:13 pm
Bike: ZX6R
State: Tasmania

Re: 05 ZX6R 636 Front Rotors

Postby QQQ » Tue Apr 30, 2013 8:34 am

I've used these on a number of bikes and they work well but....to get them to work well they have to be ground and have the buttons tweaked to loosen them off so the rotors float properly. The guys that run the business seem like good guys, provide a good service and they have a machinist that will do the grinding/adjustment at your expense....if you do decide to go with them I would strongly recommend you get them machined. (And don't use EBC HH pads with them either, the rotor material doesn't seem to like them which in my experience caused alot of overheating. Galfer or Ferodo work well.)
QQQ
Newbie
 
Posts: 37
Joined: Sun Nov 18, 2012 8:38 pm
Bike: ZX9R
State: Queensland

Re: 05 ZX6R 636 Front Rotors

Postby Caleb636 » Tue Apr 30, 2013 8:54 am

Sweet thanks for your reply mate =)
Caleb636
Newbie
 
Posts: 2
Joined: Mon Jan 21, 2013 4:13 pm
Bike: ZX6R
State: Tasmania

Re: 05 ZX6R 636 Front Rotors

Postby Juggy » Sun Sep 20, 2015 5:32 pm

They advertise them as a direct swap for the OEM rotors, but you need them machined at your expense for them to fit??!! Shouldn't that be their cost if they don'y fit properly?
I only ask cause I am after some as well for the same bike.
This is my signature and it can say whatever I want.
Juggy
KSRC Member
KSRC Member
 
Posts: 149
Joined: Sun Oct 10, 2010 8:09 am
Location: Townsville
Bike: ZX10R
State: Queensland

Re: 05 ZX6R 636 Front Rotors

Postby z900/zx9 » Thu Sep 24, 2015 9:03 am

got 2 sets of EBC rotors for my 02 and 2001 zx9 from rockymouintain work well with ebc hh pads,price was pretty good.
http://tinypic.com/hu369k.jpg[/img]
[b]Z900, z900RS , H2 Ninja 1000 Supercharged. FPV Supercharged Pursuit ute..
User avatar
z900/zx9
KSRC Contributor
KSRC Contributor
 
Posts: 2795
Joined: Wed Nov 02, 2005 1:33 pm
Location: Kawasakiville Victoria


Return to General Tech & Performance Talk

Who is online

Users browsing this forum: No registered users and 11 guests

cron