06 zx10 tappet clearances
Posted: Mon Jan 14, 2013 6:56 pmHey guys,
There is a lot of stuff including links to manuals so I've downloaded one to get clearances for the tappets. I have just heard some minor differences in specs so wondering if someone can tell me, definitively, if my Aus model 06 zx10 tappet clearances are:
Inlet : 0.15mm - 0.24mm
Exhaust: 0.17mm - 0.22mm
I'm hoping I get a quick answer since I have done the measurements as per the above specs, and now I've got the cams out and about to change the shims (again, according to the above specs).
Don't wanna put it all back together to find out my specs are wrong.
Any help appreciated.
Cheers,
Mick
There is a lot of stuff including links to manuals so I've downloaded one to get clearances for the tappets. I have just heard some minor differences in specs so wondering if someone can tell me, definitively, if my Aus model 06 zx10 tappet clearances are:
Inlet : 0.15mm - 0.24mm
Exhaust: 0.17mm - 0.22mm
I'm hoping I get a quick answer since I have done the measurements as per the above specs, and now I've got the cams out and about to change the shims (again, according to the above specs).
Don't wanna put it all back together to find out my specs are wrong.
Any help appreciated.
Cheers,
Mick