2010 ZX10R Starting issue ??

For general Technical and Performance Discussions

2010 ZX10R Starting issue ??

Postby broomie21 » Tue Nov 15, 2011 6:22 pm

Hi Guys and Girls,
I have an almost new (only ridden three times) bike that has started first push of the button everytime. Recently I dropped it in gravel of my driveway (not bad just one little mark) and since then it takes two tries to start. Not really a massive problem just annoying when it started so easily.
I make a habbit of starting it every couple of days and since the drop you have to push the button and it turns over then let it go and then push it again which fires it up instantly, but then it seems to idle rough before coming good ????
Any ideas or suggestions greatly appreciated.

THX

Dave
broomie21
Newbie
 
Posts: 13
Joined: Sat Jul 23, 2011 6:00 pm
Bike: ZX10R
State: Victoria

2010 ZX10R Starting issue ??

Postby StuMiller » Tue Nov 15, 2011 6:31 pm

Maybe it's payback...... :-)


---
I am here: http://maps.google.com/maps?ll=-33.795130,151.143562
2007 ZX6 - Road bike
User avatar
StuMiller
KSRC Contributor
KSRC Contributor
 
Posts: 1360
Joined: Thu Jun 22, 2006 12:02 pm
Location: Hobart, Tasmania
Bike: ZX6R
State: Tasmania

Re: 2010 ZX10R Starting issue ??

Postby Kermit » Tue Nov 15, 2011 9:36 pm

BAS (bank angle sensor)?
Flooded, petrol or oil?
User avatar
Kermit
KSRC Contributor
KSRC Contributor
 
Posts: 1651
Joined: Sat Apr 17, 2010 6:35 pm
Location: Sydney
Bike: ZX6R
State: New South Wales

Re: 2010 ZX10R Starting issue ??

Postby Kawawog » Wed Nov 16, 2011 9:41 am

As far as i know most gen 3's have this starting issue, especially when an aftermarket exhaust is fitted which ditches the exaust valve.. Try a different fuel, i noticed when i went off the Caltex vortex 98 and onto the BP Ultimate, mine started first time most of the time when i was riding it often.. Now that i only use it once every weekend or 2 it takes 2 tries before she fires up ;)
I wouldnt be to concerned dude, you'll find its a common thing.. Ive read of many people having this issue with the gen 3 on various other forums i frequent :kuda:
User avatar
Kawawog
KSRC Member
KSRC Member
 
Posts: 470
Joined: Mon Oct 05, 2009 12:22 am
Location: Newcastle
Bike: ZX10R
State: New South Wales

Re: 2010 ZX10R Starting issue ??

Postby broomie21 » Wed Nov 16, 2011 7:28 pm

Cheers for the replies guys much appreciated :kuda:
broomie21
Newbie
 
Posts: 13
Joined: Sat Jul 23, 2011 6:00 pm
Bike: ZX10R
State: Victoria

Re: 2010 ZX10R Starting issue ??

Postby greenmeanie » Thu Nov 17, 2011 7:10 am

Kawawog wrote:As far as i know most gen 3's have this starting issue, especially when an aftermarket exhaust is fitted which ditches the exaust valve.. Try a different fuel, i noticed when i went off the Caltex vortex 98 and onto the BP Ultimate, mine started first time most of the time when i was riding it often.. Now that i only use it once every weekend or 2 it takes 2 tries before she fires up ;)
I wouldnt be to concerned dude, you'll find its a common thing.. Ive read of many people having this issue with the gen 3 on various other forums i frequent :kuda:


I bet you read about that on zx10r.net ;) .

Mine starts first go nearly everytime. Only very occassional do i have the hit the starter twice. I only use BP Ultimate & my bike gets used nearly everyday.
As kawawog said ....i wouldn't be too worried.
Glenn
2009 ZX10R
greenmeanie
KSRC Contributor
KSRC Contributor
 
Posts: 1858
Joined: Thu May 13, 2004 5:10 pm
Location: Ipswich QLD
Bike: ZX10R
State: Queensland


Return to General Tech & Performance Talk

Who is online

Users browsing this forum: No registered users and 11 guests