ZX10R > Z1000
Posted: Mon Jan 19, 2009 6:59 ami was having a look around on the net and was interested about this guy in the states that rigged up zx10r throttle bodies to the Z1000. Apprently it made the throttle response quite sharp and snappy and with the ZX9 cams he installed ended up making close to 150rwhp! 
I was wondering if anyone locally had done this as i am sort of interested. I also wanted to know what ecu stuff i would need. I have a PC3, but i dont have any of the add ons. I am unsure what the stock PC3 is capable. I know it can control A/F Ratios but i assume i would most likely need the ignition module to control timing.
I also wanted to know if the stock ZX10R, any model, crim > bug will fit the Z swing arm and the front forks also. I assume crim would be the closest bet but stranger things have happened.
Also will the front forks fit ?
I reckon way to go would be to buy a wrecked zx10 and pull off the good bits!
I was wondering if anyone locally had done this as i am sort of interested. I also wanted to know what ecu stuff i would need. I have a PC3, but i dont have any of the add ons. I am unsure what the stock PC3 is capable. I know it can control A/F Ratios but i assume i would most likely need the ignition module to control timing.
I also wanted to know if the stock ZX10R, any model, crim > bug will fit the Z swing arm and the front forks also. I assume crim would be the closest bet but stranger things have happened.
Also will the front forks fit ?
I reckon way to go would be to buy a wrecked zx10 and pull off the good bits!
