Kawasaki Sportsbike Riders Club - Australia - Online Forum

Hey guys.

Well i have taken the baffles out of the Yoshi TRS i have on the Z and i must say fuel economy has gone out the window and it doesnt seem to make power as well! I expected this to happen! So i am not upset about that!

However i have decided that i will get PC3 pretty soon to fix it all up. I have never bought one before and wanted to know a bit about them! Anyone else who has a Z1000 or any other biek for that matter and has had 1 installed and tuned up what were the results ?
Sorry if the question seems a bit vague i just want to be pointed in the right direction. Where is a good place to buy them from? I know a good mechanic who has a dyno and the works who has tuned hundreds of them!

Thanks for the help guys!

btw i found this on ebay, any good?

http://cgi.ebay.com.au/Dynojet-Power-Co ... 286.c0.m14

Top one is no powercommander
bottom line is air fuel ratio

bottom one is power commander with basic map
see how the line is smoother, (not perfect yet)

06 z1000
debaffled pipes and filter

yeah thats pretty handy to know, thanks for posting that up! I was saying to my mate i would be happy if it made at least 120hp at the rear and well, there you go!
Pic is a bit small, did it make any more power ? You have Akra's on yours dont you ?

I think it made about 3hp difference.. about 125 at the wheel

Depends on the dyno too

akro carbon slipons now (it had debaffled standard pipes at the time of the testing)

yeah 125hp sounds pretty good, i would be happy with that. How many KM's to a tank do you get now also ? I am only getting about 170-180km's but thats a stock bike with link pipe and 2 cans and baffles taken out!

Where is a good place to get a PC3 from and what is a good price to pay ?

I'm after one for the Z1000 as well, so very interested to hear of a good place to buy one. Might be able to get a bit of a discount if there are a few of us who need one.

Well i have 2 sources so far, can get them for $420 delivered, if you are interested in getting 1 soon Nelso let me know and i will let them know

I'd say superbike supply, and say hi to tim for me

If you buy it o/s and things go wrong (and they do) you have no warranty

220km before reserve starts flashing, it's pretty good

that isnt to bad at all i must say! Better than what i ma getting!!!

ttc wrote:I'd say superbike supply, and say hi to tim for me

If you buy it o/s and things go wrong (and they do) you have no warranty

220km before reserve starts flashing, it's pretty good

Can't seem to find a phone number on their site to "say" hi. Any chance of getting one or do I have to email and wait? I might be up for some brake lines, K & N, and PCIII but want to ask some questions first. Their filter and commander kit is $563 but the 3 items that are in the kit add up to $510 if you buy them separately. WTF?

Their price on the PCIII is $410 delivered Saki so it might be worth chasing up. I will be up for getting one any time you are ready.

Anyone else want to join in on the order?

Power Commander USB3 to suit most models (including the Z1000) is $410 delivered.

The kit price with the Air Filter Etc was set when we had the PC3 prices higher than what they are at the moments.

Orders are processed online at http://www.superbikesupply.com.au

No advertised phone number, however we can be contacted at sales@superbikesupply.com.au

Regards,
Tm

PS: Hi TTC

I had my 04 Z1k custom mapped at Dynoverks (Melbourne), with a result of 130hp & 70 ft/lbs of torque @ the wheel.
The Zed is all about the torque, so don't get too worked up on how much peak HP it makes.

I have a full Ti Muzzy exhaust, K&N & airbox mod.
I also got my PC3 from Tim at Superbike Supply.
His service & pricing is fantastic.

I got off my bum and had a look at the finished dyno sheet, 129hp and about 68nm of torque

Different dyno's do read differently, other dyno's have read it at 122 and 125



Either way, you will love the difference it makes

Ah thats it, Hey Superbike i sent you a message on ebay about the PC3's for hte Z1000 i reckon i will order one soon! 130hp sounds pretty good!

Superbike Supply wrote:Power Commander USB3 to suit most models (including the Z1000) is $410 delivered.

The kit price with the Air Filter Etc was set when we had the PC3 prices higher than what they are at the moments.

Orders are processed online at http://www.superbikesupply.com.au

No advertised phone number, however we can be contacted at sales@superbikesupply.com.au

Regards,
Tm

PS: Hi TTC

Well there you go, I had no idea you were a member here, let alone a sponsor! Thanks Tim for the response, I will be in touch to order some bits from you soon.