Page 1 of 1
clutch for a 05 636.
Posted:
Sun Jan 27, 2008 7:53 amby stuartzx6
I have 40,000km on the bike and it has to get a new clutch.
What are the option out there for me and in your experience which one would be the best??? I think it's only the plates but i dunno
thanks stuart
Re: clutch for a 05 636.
Posted:
Mon Jan 28, 2008 2:52 pmby Neka79
i suggest sum1 needs a heavy duty clutch!!
my blade had 70,000km and original clutch.. and im sure phils 110,000km zx9r is still on 1st clutch (only thing hes replaced is battery- ive heard the story a few times)...
how can u need a clutch already??
Re: clutch for a 05 636.
Posted:
Tue Jan 29, 2008 11:14 amby stuartzx6
i dunno it is just slipping alot. always out or 2nd at about 8,000
Re: clutch for a 05 636.
Posted:
Tue Jan 29, 2008 11:25 amby MadKaw
stuartzx6 wrote:i dunno it is just slipping alot. always out or 2nd at about 8,000
Get some verniers onto the plates to check thickness and measure the spring lengths.
If all is within tolerance, try scuffing up the metal plates as they may have glazed over.
If the plates are OK try some heavier springs like Barnett or Goodridge...
What oil are you running.?
Re: clutch for a 05 636.
Posted:
Wed Jan 30, 2008 7:47 amby stuartzx6
I had the bike serviced and they put in Motul full synthetic.
Re: clutch for a 05 636.
Posted:
Wed Jan 30, 2008 1:07 pmby Saki
like wat MadKw said...
I remember in my 250cc i ran full synthetic oil and it used to slip for the first few hundred km's then it would bite nicely. Have u tried using a different oil, otherwise try wat madkaw said and pull all the clutch apart and check it out!
Re: clutch for a 05 636.
Posted:
Wed Jan 30, 2008 2:09 pmby up2nogood
If it is shagged (my old 9's was worn out when I got it, previous owner was a shit rider) surf the net for a US supplier of Barnett gear. Unfortunately it was HEAPS cheaper than local suppliers.
Re: clutch for a 05 636.
Posted:
Fri Dec 12, 2008 9:34 amby stuartzx6
new clutch going in on the weekend. ended up getting plates, springs etc... what oil do you think will be the best. it has 45k on the clock and i do alot of traveling with a few fun rides during the month, i was looking at motul5100 but would like to here any other opinons out there.
Stuart
Re: clutch for a 05 636.
Posted:
Wed Mar 04, 2009 1:06 pmby stuartzx6
Change the clutch and springs witch is going like a dream however still sliping out of 2nd. Next Job I am going to pull the whole engine out and pull out the gearbox over the next few week and have a look at it. I have been informed it might be one a the SYNCROS in the gearbox. so we will see.
Re: clutch for a 05 636.
Posted:
Thu Mar 05, 2009 6:51 pmby zxsixr03
My money is on the the fork selector its easily bent from a clunking gear change