Sintered Brake Pads advice needed

For general Technical and Performance Discussions

Sintered Brake Pads advice needed

Postby thewonderer » Thu Jun 14, 2007 10:21 pm

Hi Guys,

I'm wanting to change the break pads on my 2003 zx-6r. I want some that give a bit more performance from the word go.

I used to have sintered brake pads on my old 6r in the UK and they gave a great sound when the pads were working, a kind of whining sound that sounds awesome. I used to have Carbone Lorraine pads which were great.

I understand that EBC HH pads are common over here but reading there website, they seemed to have removed all the particles from the sintered pads that make the sound.

Can anyone recommend which brands of pads to get that offer better performance than the OEM zx-6r pads and also the great sintered breaking sound.

Thanks in advance.

Martin

PS live in brisbane so if you know a shop on the northside, so much the better :)
thewonderer
Warming up
Warming up
 
Posts: 80
Joined: Fri Mar 10, 2006 11:33 pm
Location: Bray Park, Brisbane

Postby Barrabob » Thu Jun 14, 2007 11:35 pm

I have been using goldfren carbon ceramic s3 racing pads, they work heaps better than the stock pad or the ferodo sintered.

the ferodo sintered make a noise when you use them but its also wearing out the disks where the goldfren pad is softer but also cheaper and doesnt damage the disk.

I pay 60 bucks for a set off front ones and theres four pads a side.
If I rode my bike at the speed of light, what would happen when I switched on its headlights?

Image
Barrabob
KSRC Contributor
KSRC Contributor
 
Posts: 1882
Joined: Sat Sep 18, 2004 11:00 am
Location: Brisbane

Postby thewonderer » Fri Jun 15, 2007 8:46 am

good to hear from you barrabob... hows things going?

They sound good.. do the s3's still make that sintered braking sound or are they silent?

Do they pads give any surprises such as a lot of bite early on are they similar to the oem pads of the 6r?

Can you recommend a supplier?

Cheers

Martin
thewonderer
Warming up
Warming up
 
Posts: 80
Joined: Fri Mar 10, 2006 11:33 pm
Location: Bray Park, Brisbane

Postby Barrabob » Fri Jun 15, 2007 9:46 pm

team moto at bowen hills sell them or at least thats where i get mine from and yes they do make some sound and are reasonably bity, actually you have to watch suddenly banging them on in trafic. :D

They are good pads you wouldnt be disapointed in them i can assure you ,the downside is I get 10000kms max out of them but they are half the price of ferodo and a much nicer pad so i would rather buy them and change more often.
If I rode my bike at the speed of light, what would happen when I switched on its headlights?

Image
Barrabob
KSRC Contributor
KSRC Contributor
 
Posts: 1882
Joined: Sat Sep 18, 2004 11:00 am
Location: Brisbane

Postby greeny » Sat Jun 16, 2007 10:46 am

I gave SBS Sintered pads a go on my 2000 6R a while ago. I really didn't like them. They had very little feel,, and once they got hot i found there performance was not as good as standard pads. I might have gotten a set from a crappy batch but i may as well fitted to dog turds in my calipers.
I took them out after about 2 months cause they were just shit.

I love the EBC HH pads.
They have heaps of feel, and are always predicableand can take a flogging with no adverse signs

Two enthusiastic thumbs up.
2007 Husqvarna SMR450
User avatar
greeny
KSRC Member
KSRC Member
 
Posts: 415
Joined: Thu Aug 04, 2005 8:00 am
Location: Adelaide- S.A.
Bike: Yamaha
State: South Australia

Postby chuffed » Sat Jun 16, 2007 9:12 pm

I use the EBC HH pads on my 12, they give alot more innitial bite than the standard ones. They do make a noise though i have been told that they shouldnt, even other guys who have ridden it have commented on the noise they make.

Two more thumbs up here
weiloilbeefhooked
User avatar
chuffed
KSRC Member
KSRC Member
 
Posts: 193
Joined: Sat May 13, 2006 3:09 pm
Location: Mackay, Queensland

Postby thewonderer » Mon Jun 18, 2007 4:13 pm

thanx for the heads up guys.

I called teammoto bowenhills and they do have them in but at 39 a set, so looks like inflation got to them.

With the initial bite from the s3's, are they still really easily controllable with plenty of feel if you wanna break gently on dodgy surfaces?

I will see if anywhere else has them a bit cheaper, but am guessing that's a good price for pads..

thanx

Martin
thewonderer
Warming up
Warming up
 
Posts: 80
Joined: Fri Mar 10, 2006 11:33 pm
Location: Bray Park, Brisbane

Postby dave#3 » Mon Jun 18, 2007 6:31 pm

I can't speak highly enough of the EBC HH pads, and, if you squeeze them hard enough you can get the whining noise you're chasing :)
dave#3 | '03 z1000 roadie | '08 zx6r tracky | '03 KLX400R dirty
http://www.oz4x4.net/gallery2
Winner - KSRC Murphy's Law Award 2008
User avatar
dave#3
Team Ninja
 
Posts: 3097
Joined: Mon Apr 26, 2004 7:11 pm
Location: Yarramalong, NSW
Bike: Z1000
State: New South Wales

Postby Gosling1 » Mon Jun 18, 2007 9:21 pm

dave#3 wrote:..... if you squeeze them hard enough you can get the whining noise you're chasing.......


:lol: :lol: :lol: :lol: is that boobs or bollocks mate ??

:shock:
".....shut the gate on this one Maxie......it's the ducks guts !!............."
User avatar
Gosling1
Team Donut
Team Donut
 
Posts: 13823
Joined: Mon Jun 20, 2005 9:30 pm
Location: Anarchy Road
Bike: Z900
State: ACT

Postby dave#3 » Mon Jun 18, 2007 9:34 pm

Gosling1 wrote:
dave#3 wrote:..... if you squeeze them hard enough you can get the whining noise you're chasing.......


:lol: :lol: :lol: :lol: is that boobs or bollocks mate ??

:shock:


You kill me Gos!
dave#3 | '03 z1000 roadie | '08 zx6r tracky | '03 KLX400R dirty
http://www.oz4x4.net/gallery2
Winner - KSRC Murphy's Law Award 2008
User avatar
dave#3
Team Ninja
 
Posts: 3097
Joined: Mon Apr 26, 2004 7:11 pm
Location: Yarramalong, NSW
Bike: Z1000
State: New South Wales

Postby Neka79 » Mon Jun 18, 2007 11:13 pm

dave#3 wrote:
Gosling1 wrote:
dave#3 wrote:..... if you squeeze them hard enough you can get the whining noise you're chasing.......


:lol: :lol: :lol: :lol: is that boobs or bollocks mate ??

:shock:


You kill me Gos!

maybe it was nuts?? and he squeezed too hard?
Neka
2006 Zeddy 1000
1996 VS series 2 S pak Ute
Image
User avatar
Neka79
Extreme Post Whore :-)
Extreme Post Whore :-)
 
Posts: 13115
Joined: Fri Apr 23, 2004 12:20 am
Location: Adelaide......nah its cool..no really!!
Bike: Z900
State: South Australia

Re: Sintered Brake Pads advice needed

Postby thewonderer » Mon Jun 25, 2007 4:12 pm

OK,

picked up my pads at the weekend and installed them. Pretty straight forward install.

Gave them a spin after pumping the break lever and after a few uses they have started to be in nicely. They do offer better performance than the tokio pads which the bike came with. They feel more progressive and a bit stronger on initial contact. Nothing to make you cream your pants mind you.

No sounds coming from them yet :( Hoping when they bed in some more they will make that sintered 'whining' sound.
thewonderer
Warming up
Warming up
 
Posts: 80
Joined: Fri Mar 10, 2006 11:33 pm
Location: Bray Park, Brisbane

Re: Sintered Brake Pads advice needed

Postby the kid » Tue Jun 26, 2007 9:57 am

After your first emergency stop , you should get that whining sound , as you remove your nuts from the back of the tank . Slapping the side of your neck will help to put them back in place . :lol:
Ummmm let me see
User avatar
the kid
KSRC Addict
KSRC Addict
 
Posts: 3948
Joined: Thu May 12, 2005 5:10 pm
Location: Bendigo
Bike: Yamaha
State: Victoria

Re:

Postby daffy67 » Sat Sep 08, 2007 5:49 pm

Barrabob wrote:team moto at bowen hills sell them or at least thats where i get mine from and yes they do make some sound and are reasonably bity, actually you have to watch suddenly banging them on in trafic. :D

They are good pads you wouldnt be disapointed in them i can assure you ,the downside is I get 10000kms max out of them but they are half the price of ferodo and a much nicer pad so i would rather buy them and change more often.

I picked up a set today for the 10, got 'em for $35 each.
Blue '07 ZX-10
User avatar
daffy67
KSRC Member
KSRC Member
 
Posts: 244
Joined: Thu Mar 16, 2006 9:48 pm
Location: Brisbane
Bike: ZX10R
State: Queensland

Re: Sintered Brake Pads advice needed

Postby zxsixr03 » Thu Sep 20, 2007 8:12 pm

Does anyone know anywhere in Sydney to get these goldfren carbon ceramic s3 racing pads?
Thanks a million.
Built by craftsman, Designed by a genius, Ridden by a twat....
User avatar
zxsixr03
KSRC Regular
KSRC Regular
 
Posts: 896
Joined: Mon Jan 24, 2005 7:04 pm
Location: Sydney
Bike: ZX6R
State: New South Wales

Next

Return to General Tech & Performance Talk

Who is online

Users browsing this forum: No registered users and 34 guests