front guard
Posted:
Tue Apr 17, 2007 11:28 amby mohawk miss
Okay, dumb question time...
my front wheel guard (zzr250) is really loose. I cant find where I should be tightening it. Anybody know?
Thanks
Posted:
Tue Apr 17, 2007 11:36 amby Frank
Generally there are bolts on the inside of the guard, just reach up and feel for any bolts between the tyre and the inside of the guard.
Posted:
Tue Apr 17, 2007 11:48 amby mohawk miss
Thanks Frank, will get the HR to do it later.
Posted:
Wed Apr 18, 2007 1:04 amby Neka79
mohawk miss wrote:Thanks Frank, will get the HR to do it later.
just hand sum dude a spanner and show him ya stickers and im sure he will do it for u!!
Posted:
Sun Apr 22, 2007 1:39 pmby mohawk miss
Aha, well not that simple,was it?
For future reference for other ZZR250 owners, there are 2 bolts and 2 rivets on each side of the guard. 1 rivet was gone, the resulting vibration making the others loose. Remove guard (accompanied by much bad language by the Honda Rider), drill out and replace both bottom rivets. Result=great.
Refit guard, go to Camden via Silverdale this morning, stop for hot chocky, the #&!*& is loose AGAIN! Now thinking of replacing rivets with screws, stop me if you can think of a better solution.......