Anyone in western sydney who can weld *AND has a welder:P*?

[WRT_GPX]

um, yah, today my right exhast mount shat itself, it was always a little loose from being dropped a few times from the previous owner, but it gave up today, its still attached to the seat area somehow, ill have a look later, but its shaking like theres no tomorrow if you hit a bump.

so my question is there anyone in my area that would be able to help me fix it ? if there is i could come there and ill even buy you lunch as a reward *although since im a student itd be macdonads *

[Fallen_Angel]

my grandfather could fix it my numbers 0412550187 (ps names chrissie )

[bonester]

I'm not 100% sure, but I think the GPX exhaust/footpeg bracket bolts to the rear subframe, underneath the rear plastics. (which are a little tricky to get off- did that recently for a mate.) Might just be a matter of removing, straightening and bolting up again. Hope so. Maybe you have lost a bolt out of it? Actually it might be behind the sidecover which is a piece of piss to remove?

[WRT_GPX]

no its not lost the bolts, but i THOUGHT the last time i checked it that it was broken from the n00b learner before me *goes out to check* yes the 2 bolts to just under the seat that connect to the frame are still there but the metal bracket that attaches to the fram has snapped... looks like from rust.

[bonester]

Maybe the bracket could be bought from the wreckers cheap? (It's separate to the frame isn't it?) Or cable ties and or fencing wire or hoseclamps could be used to bodgy it!

[WRT_GPX]

lol im planning to bodgy it for the time being with wire throug hthe bolt holes .......

then when i have some money (uh uni student here, i earn like 50 bucks a week) ill figure somthing out. oh and the bracket is welded onto the frame at the top... stupidly

[zbeast]

My old man is at Douglas Park. I can find out when he is free and he can weld it for you. It won't cost you any $ but it might take some time as he likes to talk a bit. (well ok a lot....but he can weld)

[bonester]

Coincidentally I changed the oil on a clients GPX tonight- I see what you mean. If you get the plastics off it should cost you jack shit to get tacked back together!

[SuN~e]

hey chrissie,
any chance you can help me out?
i got a few cracks in my fairing =\
would your grand father know how to weld it up?
im in prestons aswell, liverpool prestons right? lol
wpt do you go to uws campbelltown?

[mike-s]

fairing welding is a totally different animal to plastic welding!

[Fallen_Angel]

lol he'd probably b able to fix that 2 for a price thou XD and yup liverpool prestons.. where abouts are you??

[SuN~e]

:O
that would be good if he could fix it, but for how much?
need 2 cracks to be fixed >.< one on the side fairing near the bottom and one on the front fairing near the mirrors of a zxr250
well theres 2 sides of prestons, one side has with the prestons shopping village and the other side with the primary school.
i live on the side with the primary school but pretty close to prestons shops

what about you?

[Fallen_Angel]

5 mins from the shops

[SuN~e]

thats kool
well if possible, can u get me a price and if you could help me out, it would be very well appreciated

[Fallen_Angel]

lol dont know the price but it would be cheap $20?