Heavy clutch notchy gearbox and gear indicator out

All

Just finished 2 nd track day on my 08 zx10. A few issues, can anyone help.

First the clutch is very heavy compared to my old bike. Second the gearbox is notchy on downshift from 5 to 4. Third I hade the shift lever converted to race pattern and afterward the gear indicator isn't working.

The bike has done 14000kms. Is it just normal wear and tear to have a heavy clutch and notchy shifts?

Any fix suggestions on the gear indicator?

Cheers
Mark

Gday,
Not sure about the clutch could be an adjustment issue, but if u have changed to race pattern make sure the geometry is right from the lever and linkage. the lever and rod should be as parallel as possible for a smoothe shift. Sometimes when you reverse the standard linkage you need to play around a little to find the "sweet" spot.

Also the gear indicator issue could also be the same prob as its not quite in the correct position during shifting.

Thanks Jon will try that