Can I get smaller throttle tube for the ZX10R?

For general Technical and Performance Discussions

Can I get smaller throttle tube for the ZX10R?

Postby knightsrider » Mon Mar 22, 2010 8:09 am

Hoping someone out there can help me. I have a 2004 ZX10R. Great bike. Been riding it since about Dec 2009. But I am having some problems with my right hand which tends to get quite sore around the joints in the thumb from having to hold the throttle open. I have little hands (being a girlie) and this can spoil the day when I end up in quite a bit of discomfort after a few hours fun fanging in the Adelaide hills. I plan to go over to Phillip Island, Vic in October for Moto GP. This will be my first trip using the ZX10R .... so what are my solutions? Can I get a smaller throttle tube to make gripping easier? I've got Harris grips on the bike at the moment, and maybe these grips are fatter than the OEM ones? Should I go the easy route and purchase something like a throttle rocker (not a cruise control one but one that will enable me to vary speeds)? If someone has modified their throttle tube, I'd also be interested to know if it was a difficult task. I've read on other forums some people use R1 or GSXR throttle tubes to modify their bikes because they are smaller in diameter. This is what I am wondering about and whether it is possible to do this for the ZX10R without any negative impact or a lot of messing around.
knightsrider
Newbie
 
Posts: 12
Joined: Sun Feb 07, 2010 4:20 pm
Bike: ZX10R
State: South Australia

Re: Can I get smaller throttle tube for the ZX10R?

Postby MadKaw » Mon Mar 22, 2010 8:19 am

I don't believe you can get a smaller tube as these are based on the handlebar size, which on almost every bike is about the 22mm diameter.
Your best bet would be to look around for thinner grips or or go the throttle rocker option..
Dave
2010 Z1000
ex bikes
05 ZX-10R Race Bike - No.77
95 ZXR750R M Race Bike - No. 75
98 ZX9R Race Bike - No. 000
zx6r, zx7r, GPX750, GPX500, lots of KX's.
Image
I ride way too fast to worry about cholesterol
User avatar
MadKaw
Administrator
Administrator
 
Posts: 9670
Joined: Tue Apr 20, 2004 4:33 pm
Location: Windsor or the Creek..
Bike: ZX10R
State: New South Wales

Re: Can I get smaller throttle tube for the ZX10R?

Postby Wattie » Mon Mar 22, 2010 8:24 am

throttle rockers are ok,

just remeber to flick it around out of the way when the corners are to be had. 8)
Wattie #55
ZX10R "The Crim"
ZX10R "Gumby"
Proudly Supported by Allfixed Automotive 9634 1455
sam & srt, survived
RGM, left a message
User avatar
Wattie
VIP MEMBER
VIP MEMBER
 
Posts: 10041
Joined: Mon Oct 31, 2005 12:23 pm
Location: Bligh Park
Bike: ZX10R
State: New South Wales

Re: Can I get smaller throttle tube for the ZX10R?

Postby tim » Mon Mar 22, 2010 9:37 am

Sorry to hijack, but how about larger grips? With winter gloves the size is good, but with summer gloves my fingers are wrapped around too far I feel..... I'll look into it coming into next summer.........
2008 ZX6R Special Edition
User avatar
tim
VIP MEMBER
VIP MEMBER
 
Posts: 5815
Joined: Wed Dec 10, 2008 10:12 pm
Location: Sydney, NSW
Bike: ZX6R
State: New South Wales

Re: Can I get smaller throttle tube for the ZX10R?

Postby knightsrider » Mon Mar 22, 2010 6:10 pm

I believe racing grips are thinner but harder - so maybe for everyday riding I would not like them. But if there are thinner grips someone can recommend... I'm listening. For me using winter gloves and the fatter grips means I can barely grasp the levers! There is too much padding inbetween! Maybe I should hope I just don't have to brake... :P
knightsrider
Newbie
 
Posts: 12
Joined: Sun Feb 07, 2010 4:20 pm
Bike: ZX10R
State: South Australia

Re: Can I get smaller throttle tube for the ZX10R?

Postby ZX-10R_04 » Mon Mar 22, 2010 7:11 pm

Most thin ProGrips are the best seems they have a nice soft gel texture & you wouldn't think they was thin grips from the soft feel of them
If It Aint A Lime It Must Be A Lemon !!!!

04 ZX10R & 08 ZX10R
User avatar
ZX-10R_04
KSRC Regular
KSRC Regular
 
Posts: 762
Joined: Wed Aug 11, 2004 11:18 pm
Location: Launceston Tasmania
Bike: ZX10R
State: Tasmania

Re: Can I get smaller throttle tube for the ZX10R?

Postby knightsrider » Mon Mar 22, 2010 9:12 pm

ZX-10R_04 wrote:Most thin ProGrips are the best seems they have a nice soft gel texture & you wouldn't think they was thin grips from the soft feel of them


Thanks. I'll try to source these.
knightsrider
Newbie
 
Posts: 12
Joined: Sun Feb 07, 2010 4:20 pm
Bike: ZX10R
State: South Australia

Re: Can I get smaller throttle tube for the ZX10R?

Postby King Nicholas » Tue Mar 23, 2010 12:17 am

Have you looked at your wrist positioning.
This may sound silly but it is often the cause of sore wrists.
Even though it may not feel comfortable at first, grip your bars further around so your wrist is as straight as possible, not arched back to hold the throttle open.
It would be easier to describe with a diagram.
King Nicholas. Keeping it unreal.
User avatar
King Nicholas
KSRC Member
KSRC Member
 
Posts: 411
Joined: Thu Jun 04, 2009 8:11 pm
Bike: It's not worth Mentioning
State: New South Wales

Re: Can I get smaller throttle tube for the ZX10R?

Postby oldman » Tue Mar 23, 2010 9:20 am

Another way would be to exersise your wrist. Place your arm on your knee in a sitting position with your palm of your hand up and your hand extending beyond the knee, get a light weight, (maybe 5lbs) and curl your wrist up and down, fully extending your fingers as you lower and lift the weight with your wrist. Do this twice a day doing about 8 wrist curls each time. I don't explain things worth a shit so I hope you can figure out what I have written. This exercise worked for my wife who was having the same problem. It took about 2 weeks of exercising before it made a difference. Good luck. Also having a Jim beam and a beer after helps as well.
oldman
 

Re: Can I get smaller throttle tube for the ZX10R?

Postby knightsrider » Tue Mar 23, 2010 9:19 pm

Appreciate the suggestions about the wrists, but it is actually the thumb joint that is sore. I lay on the tank when I ride the ZX10R. I'm a shortie and can hug it like a koala. And I'm even sillier than I thought - I have a spacer in the spring which makes it even taller, but hey! It's only a problem when I have to put the foot down! But the exercises mentioned - yep I do them or similar. I think it is a chafing, rubbing problem where the first joint on the thumb (that is the once closest to the end of the thumb) gets tender because it is constantly pressured against the throttle. After a while, it gets really sore and I have to rub it at every top to relieve the tenderness and inflammation. Hence the idea of a smaller grip might allow me to nestle the throttle closer to my palm. Anyway, if all else fails... scotch and coke does help (but not by rubbing it on the hand!). Will be fun riding the ZX10R down to Phillip Island! Woo hoo!
knightsrider
Newbie
 
Posts: 12
Joined: Sun Feb 07, 2010 4:20 pm
Bike: ZX10R
State: South Australia

Re: Can I get smaller throttle tube for the ZX10R?

Postby 6maniac » Tue Mar 23, 2010 9:38 pm

Thinking left field here ......... have you tried different gloves ? I once had a pair that created a pressure point in the same area. HTH. ;)
I've spent over 40 years of my life riding bikes .... the rest of it, I wasted ..
If it's got wheels or tits, it's gonna give you trouble !
HCST #2
Team Black '09 ..... R.I.P. - 2011.
Back in Black....2011.
User avatar
6maniac
KSRC Addict
KSRC Addict
 
Posts: 4832
Joined: Thu Oct 18, 2007 7:26 pm
Location: Hawkesbury
Bike: Z750
State: New South Wales

Re: Can I get smaller throttle tube for the ZX10R?

Postby King Nicholas » Sun Mar 28, 2010 8:34 am

knightsrider wrote:Appreciate the suggestions...I lay on the tank when I ride the ZX10R...I think it is a chafing, rubbing problem...After a while, it gets really sore and I have to rub it...Anyway, if all else fails... scotch and coke does help (but not by rubbing it on the hand!). Will be fun riding the ZX10R down to Phillip Island! Woo hoo!


Wow.
If my scooter rubbed me I would not need a girlfriend.
Please tell me how you ride.
I think I must be doing it wrong.
King Nicholas. Keeping it unreal.
User avatar
King Nicholas
KSRC Member
KSRC Member
 
Posts: 411
Joined: Thu Jun 04, 2009 8:11 pm
Bike: It's not worth Mentioning
State: New South Wales


Return to General Tech & Performance Talk

Who is online

Users browsing this forum: No registered users and 9 guests

cron