storing exhaust

For general Technical and Performance Discussions

storing exhaust

Postby hidepenny » Wed Feb 27, 2008 8:28 am

i have the original exhaust taken off and obviously i won't be able to sell it as no one wants it....what's the best way to store it? or is it not recommeneded? thanks!
hidepenny
KSRC Regular
KSRC Regular
 
Posts: 970
Joined: Mon Dec 19, 2005 5:58 pm
Location: Melbourne - Eastern
Bike: ZX6R
State: Victoria

Re: storing exhaust

Postby Toby » Wed Feb 27, 2008 8:34 am

Spray the inside and outside with WD40/Inox or equivalent to stop it rusting, wrap it up in a blanket or rags and chuck it up on a shelf ;)
GSXR1000 White K9
Toby
Warming up
Warming up
 
Posts: 88
Joined: Thu Jan 31, 2008 2:00 pm
Location: West Ryde Sydney
Bike: Suzuki
State: New South Wales

Re: storing exhaust

Postby mike-s » Wed Feb 27, 2008 8:49 am

best to take it off after its cooled down after a nice long run and while there's been no humidity in the air . That is a bit of insurance that there's no moisture in there when you wrap it up.
Image
If it hurts, you aren't doing it right.
User avatar
mike-s
Apprentice Post Whore :-)
Apprentice Post Whore :-)
 
Posts: 6142
Joined: Sat Aug 07, 2004 5:43 am
Location: Arncliffe, Sydney
Bike: Suzuki
State: New South Wales

Re: storing exhaust

Postby Flywheels MC » Wed Feb 27, 2008 10:46 am

Toby wrote:Spray the inside and outside with WD40/Inox or equivalent to stop it rusting, wrap it up in a blanket or rags and chuck it up on a shelf ;)


Be a bit careful with WD40 and other penetrating oils as they have a corrosive effect when left on for extended periods,especially on high carbon steel.
Ron C, Director, FME
PH: 96997800
Email: sales@flywheels.com.au
Web: http://www.flywheels.com.au
User avatar
Flywheels MC
KSRC SPONSOR
KSRC SPONSOR
 
Posts: 283
Joined: Fri Jun 29, 2007 10:05 am
Bike: ZX10R
State: New South Wales

Re: storing exhaust

Postby jl4049 » Wed Feb 27, 2008 3:35 pm

Yeah, better of to spray with lanotec, soft seal or similar.
C1 ZX9R
User avatar
jl4049
KSRC Member
KSRC Member
 
Posts: 110
Joined: Thu Dec 13, 2007 3:31 pm
Location: Sale, Vic
Bike: ZX9R
State: Victoria

Re: storing exhaust

Postby Slow and wobbly » Wed Feb 27, 2008 4:49 pm

Flywheels MC wrote:
Toby wrote:Spray the inside and outside with WD40/Inox or equivalent to stop it rusting, wrap it up in a blanket or rags and chuck it up on a shelf ;)


Be a bit careful with WD40 and other penetrating oils as they have a corrosive effect when left on for extended periods,especially on high carbon steel.


WD isn't much of a preservative as he said :arrowu:
Never thought much about corrosion on a stored exhaust - unless you are looking to preserve it for the next 50 years just rip it off and hang it from the roof of the shed or garage. Unlikely to be banged around or have anything heavy put on top of it if it's hanging up as a dust collector.
I got a sweater for my birthday. I realy wanted a moaner or a screamer.
Image
User avatar
Slow and wobbly
KSRC Contributor
KSRC Contributor
 
Posts: 1541
Joined: Sun Sep 11, 2005 8:51 am
Location: Melbourne
Bike: Scooter
State: Victoria

Re: storing exhaust

Postby Neka79 » Wed Feb 27, 2008 10:25 pm

i just stuck mine on a shelf...
Neka
2006 Zeddy 1000
1996 VS series 2 S pak Ute
Image
User avatar
Neka79
Extreme Post Whore :-)
Extreme Post Whore :-)
 
Posts: 13115
Joined: Fri Apr 23, 2004 12:20 am
Location: Adelaide......nah its cool..no really!!
Bike: Z900
State: South Australia

Re: storing exhaust

Postby mike-s » Wed Feb 27, 2008 11:42 pm

ditto, but who knows where the OP has his bike stored, could be in a cave in tibetan mountains for all we know. ;)

I figure take it off after a good run and throw it in the box the new exhaust came in and leave it at that
Image
If it hurts, you aren't doing it right.
User avatar
mike-s
Apprentice Post Whore :-)
Apprentice Post Whore :-)
 
Posts: 6142
Joined: Sat Aug 07, 2004 5:43 am
Location: Arncliffe, Sydney
Bike: Suzuki
State: New South Wales

Re: storing exhaust

Postby photomike666 » Thu Feb 28, 2008 5:08 am

With the CBR I took it off, did the WD40 thing, wrapped it and stuck it in the bix the replacement exhaust came in. 2 years later I sold it in perfect condition.

The 10's cans have never been used, so they are in the box the bike shop supplied them in. I haven't even opened it.
--------------------------------------------------------------------------------------------------------------
07 ZX10R since new, tracky TBA, KX450F, 87 CR250 restoration, GT MTB - I've got serious thrill issues, dude
User avatar
photomike666
Apprentice Post Whore :-)
Apprentice Post Whore :-)
 
Posts: 5956
Joined: Sat Jan 15, 2005 12:01 am
Location: Melbourne
Bike: ZX10R
State: Victoria


Return to General Tech & Performance Talk

Who is online

Users browsing this forum: No registered users and 27 guests