Bar Risers

For general Technical and Performance Discussions

Bar Risers

Postby Paz » Fri May 05, 2006 11:51 am

Hey guys, has anyone put on bar risers or something similar?

http://www.helibars.com/

http://www.zianet.com/GenMar/

Would you recommend them? Have you had any problems, ie the bars hitting the tank or instrument cluster?

Helibars seem fairly exy and the second ones don't list the 03 zx6r on their site so I just emailed them.

Cheers
Paz
Black '06 ZX10R
9.8 @ 144mph
User avatar
Paz
Warming up
Warming up
 
Posts: 88
Joined: Wed Jun 01, 2005 1:31 pm
Location: Gold Coast
Bike: ZX10R
State: Queensland

Postby Lainie » Fri May 05, 2006 11:52 am

I got Tones these for the FJR, he loves them and has had no problems with them at all. :D
User avatar
Lainie
Team Ninja
 
Posts: 3602
Joined: Fri Aug 26, 2005 1:37 pm
Location: S/E Melbourne
Bike: ER6
State: Victoria

Postby Paz » Fri May 05, 2006 12:03 pm

thanks Lainie, forgot to add in my first post, if you did get pain in your wrists did this reduce it by much?
Black '06 ZX10R
9.8 @ 144mph
User avatar
Paz
Warming up
Warming up
 
Posts: 88
Joined: Wed Jun 01, 2005 1:31 pm
Location: Gold Coast
Bike: ZX10R
State: Queensland

Postby Lainie » Fri May 05, 2006 12:07 pm

I will get Tones to answer you on this because I have never used them. all I know is that he loves them and wouldn't be without them now :D
User avatar
Lainie
Team Ninja
 
Posts: 3602
Joined: Fri Aug 26, 2005 1:37 pm
Location: S/E Melbourne
Bike: ER6
State: Victoria

Postby gizmo » Fri May 05, 2006 6:19 pm

Paz don't do it, you bought a sportsbike so now you have to suffer the pain, if you want to spend money, spend it on the suspension.
Image
Hello there I was told your a nice friendly girl
with a kind face! & easy.......
signed
"GIZMO THE CREEKY"
gizmo
KSRC Regular
KSRC Regular
 
Posts: 530
Joined: Fri Jun 18, 2004 9:34 pm
Location: Western QLD/DESERT
Bike: ZX6R
State: Queensland

Postby zx12B2 » Fri May 05, 2006 10:17 pm

i put 2nd gen heli's on the 12
also added foam grip covers and have less reach to grips with less vibration
Image
User avatar
zx12B2
Newbie
 
Posts: 38
Joined: Fri Jan 13, 2006 2:25 am
Location: Perth W.A.

Postby Tones » Sat May 06, 2006 7:34 am

I have had two bikes that I have put after market risers on. Although I have not used the brands you have listed here. I had one set made by Rod of Tingate engineering for a TLR and they were a clamp style so very adjustable. I was able to get them into a position where they would not foul anything and worked quite well. The second set were for an FJR and they were also adjustable. The second set were froma german engineering company and they were really high quality. There were no issues with these ones at all. I think the things to look into are:

1. Will they foul any part of the bike, such as tank or fairing on full lock?
I think most of the high end adapters (read expensive) would have to bear this in mind before they manufacture a quantity so you should be right.

2. Are they easy to install? Read above answer! Plus some may require you to buy "cable extenders" or replacement cables. Or you need to adjust std cables to make em work. Some may also require you to re-route cables and wiring looms.

3. It can be surprising how a small difference (as in small change to posture) can make such a large difference to how you ride. I would say thou the difference is most noticable when you are more extended in your riding position. That is to say if you are already comfortable then the angle of your wrists is teh biggest difference, if you are not comfortable then they can make all the difference. And of course they also may not.

Cheers
Image
Tones
KSRC Member
KSRC Member
 
Posts: 181
Joined: Sun Dec 18, 2005 6:40 pm
Location: SE Melb

Riser Bars

Postby QuickaKwacka » Sat May 06, 2006 10:13 pm

Paz,

This issue raised a bit of discussion on the ZX12R site some time back, have a look at the thread below ( three pages), might help you decide if they are worth it, also there are a couple links for American and Australian suppliers.

http://www.ozzx12r.net/viewtopic.php?t= ... sc&start=0

Regards
RonnieG
LET THE GOOD TIMES ROLL

Regards
RonnieG


Yes I did buy Rusty,s bike, what a ripper
User avatar
QuickaKwacka
Warming up
Warming up
 
Posts: 98
Joined: Fri Nov 11, 2005 10:02 am
Location: Newcastle NSW
Bike: ZZR1100
State: New South Wales


Return to General Tech & Performance Talk

Who is online

Users browsing this forum: No registered users and 14 guests