ohlins setup

just a quick qestion, any of u guys that race or do a lot of track time on the 06/07 10, with a ohlins ttx, i would be very interested in any feedback, spring rates ect. fitted one recently two my 07 10, have been running a very modifyied oem one. had my head around it. had one ride day after fitting the ohlins. running dunlop contol slicks, 200 rear, soft front. i took it two broady, knowing the spring was way two light 9kg.thats what it came with. im off twomorro to c a ohlins guru. 11kg is what im changing two?? any ideas would be good two hear, o and im about 92kg ready two ride

Wattie is your man here, he has a TTX rear

I dunno what spring I have...
But Zenodamper did mine. Its not stock internal either.

have spoken two stewie winton quiet often over last couple of yrs, 11 kg was a rate that came up two start with. do u run a lot of ride height? kno of one 07/10 running 9mm spacer, im running 5mm and one full turn on ride height adjuster. thats depends on tracks ofcourse. but i tend two set it and leave it.

i run stock height. I had it jacked up before, but couldn't get decent drive.

My old shock was "Stewie winton fettled" but inside was straight from the factory once pulled down and serviced etc.

see how i go, rdo twomorro so got shock out, take two krozztune twomorro, run the 11kg spring, take two broady again and play with it see how it goes. planning on going two E/C on 17 dec,hope alls well and ninja10 sorted!!

See ya on the 17th