ZX12R Fork Oil

One of my fork seals has started leaking and the oil in the forks is due for a change. I've got the fork seals but don't know what fork oil to get.

stick with the stock viscosity. Unless you do a lot of 2-up fully-loaded touring. Then, maybe go up a grade or 2.

For track-use only, you can drop as low as 5 weight, but you will need to ensure the rest of the fork set-up is good for the track as well.

Gos you know farking everything man.. Thats why you are the KSRC legend..

One of my fork seals has started leaking and the oil in the forks is due for a change. I've got the fork seals but don't know what fork oil to get.

stock is 5W oil however
you can go 7.5 W or 10w (max)

I would recommend 5W or maybe 7.5W if you do a lot of hi speed stuff
given the amount of adjustability in the 12's front legs stick maybe
with 5w and get the suspension right

hth

Smitty

Thanks for the responses. I think I'll go with the 5W as I mainly ride to work and back. I do the odd bit of 2 up riding now that Kristy's bike is sold.

Here is a question for discussion.
If the oil in a fork leg is sealed from the outside environment, there are no contaminents such as friction material from the clutch, carbon deposits and unburnt fuel to mess with it like engine oil suffers. How come it "ages" and requires replacing? - Dud fork seals not withstanding.

Here is a question for discussion.
If the oil in a fork leg is sealed from the outside environment, there are no contaminents such as friction material from the clutch, carbon deposits and unburnt fuel to mess with it like engine oil suffers. How come it "ages" and requires replacing? - Dud fork seals not withstanding.

heat...friction would cause heat....age...

Here is a question for discussion.
If the oil in a fork leg is sealed from the outside environment, there are no contaminents such as friction material from the clutch, carbon deposits and unburnt fuel to mess with it like engine oil suffers. How come it "ages" and requires replacing? - Dud fork seals not withstanding.

heat...friction would cause heat....age...

Nath

spot on

and yes...oil wears out (it stops doing its job)