Are all rs3 yoshi slip ons the same???

Hi ya folks... it appears the good folk at matt mladin imports and yoshi RD in the USA aren't interested in answering this question... so I'll put it out to you guys.

My 9 has a yoshi rs3 oval slip on can.

It's got some scratches ...I'm tossing up metal polishing - but for the about the same price, there appear to be yoshi rs3's on ebay - but they're being quoted as being for GSXR's, blades etc etc.

Since I already have a link pipe and hanger, would any RS3 fit on the 9?? I dunno and can't tell from yoshi websites whether RS3 cans are subtly different to suit each different model??

Anyone with a clue, please share!

Taa.

Rob

Hi ya folks... it appears the good folk at matt mladin imports and yoshi RD in the USA aren't interested in answering this question... so I'll put it out to you guys.

My 9 has a yoshi rs3 oval slip on can.

It's got some scratches ...I'm tossing up metal polishing - but for the about the same price, there appear to be yoshi rs3's on ebay - but they're being quoted as being for GSXR's, blades etc etc.

Since I already have a link pipe and hanger, would any RS3 fit on the 9?? I dunno and can't tell from yoshi websites whether RS3 cans are subtly different to suit each different model??

Anyone with a clue, please share!

Taa.

Rob

u would need to measure up the distance between holes etc...and the diameter of the can hole.... Mike S can give ya more details (he made a roo? pipe off a zx6r fit his rf900)

the short answer would be "NO" ...but maybe if u measure it all up, and compare with other bikes... may require a trip to the wreckers??

It depends if its a slip on or bolt up if its a slip on then yes, the one on my zx7r was from a gsxr 2000, but was a slip on, ie. I had to cut off the standards flange and put on a link pipe, if on the other hand it has a bolt up section to mount it to the exhaust then no it wont fit as most manufacturers have differnt bolt patterns, ie my zx7r has a 3 bolt and the gixxer had a 4 bolt design.

We're talking slip on.

My RS3 inlet hole diameter is 57mm... a dude selling an RS3 for a GSXR has an inlet hole diameter of 57mm too... apparently all RS3's are the same oval dimensions, only the lengths are different...

Now I need to find other bikes fitted with RS3 Yoshi's and attack them with a measuring tape to satisfy my question... any of you guys have non kwaka mates with yoshi RS3's able to post up some dimensions????

don't use the RS3 for a ZX12R - they have a funny type of aluminium 'flange' fitted to the front of the pipe, to change the cross-section from 'circular' (stock engine pipe), to 'oval' (stock RS3 shape.)

Its possible to make anything fit anything with a bit of work and ingenuity........