Switch to full style
For general Technical and Performance Discussions
Post a reply

Db Baffles - From the "I'll be Fugged" File.

Sat Oct 07, 2006 10:12 am

Well I'll be fuggered & So on.

Big Kev took his new 10r (Gumby) into Lae for the 1500ks Dyno & custom Mappage. Custom Zorst & A Commander system.

When he got his custom Stubby Zorst made they tossed a little removable end baffle in just to take a couple of decibells off the noise.

Had it dynoed with the baffle in 151hp baffle out 163hp. :shock: :shock: :shock: :shock: :shock: :shock: :shock:

Alex then remapped it for the baffle being removed & finally ended up with 164.9hp.

Those that know Alex know his dyno is pretty realistic so thats a pretty impressive number.

Anyway i thought the zorst tipbaffle would make a difference but @8% thats huge.

Sat Oct 07, 2006 10:19 am

My Staintune has the same effect. Seems to work by pushing some of the gas into the side baffles and making it go right back down the can and back up again. Adds a lot of back pressure, and a very noticable difference.

Not had mine on the dyno, but can feel the top end difference with the bung out and the mid range thickens up with it in.

Sat Oct 07, 2006 10:55 am

thats some serious stick 8)

Sat Oct 07, 2006 5:04 pm

Has anyone had a standard bike dynoed???


Neil

Sat Oct 07, 2006 5:10 pm

A mate at the creek last Sunday had his Akrapovic equipped and Mapped 10 there. It has been totalled at 164 also on a conservative Dyno. It was gobsmacking how much quicker it was than my 9!! :shock: Coming out of 12, I had a much better line and would pull away by 10 bike lengths out of the turn, but then his 10 would wind up into the top end and literally dissapear :shock: By the 100m braking marker, his bike would have at least 200m on mine :shock: I was just shocked at how much faster they are!

Sat Oct 07, 2006 5:19 pm

Neilp wrote:Has anyone had a standard bike dynoed???


Neil


There was one at our dyno day earlier this year...can't remember exactly what it got but it was over 160

Sat Oct 07, 2006 5:28 pm

Mick C wrote:
Neilp wrote:Has anyone had a standard bike dynoed???


Neil


There was one at our dyno day earlier this year...can't remember exactly what it got but it was over 160


i think it was like 160.1 or something haha only 5hp more thsn the 05's with a slip on.

Sat Oct 07, 2006 5:38 pm

Considering that the '06 mounts its twin catalytic converters in the collector as opposied to the mouth of the muffler on the '04-'05, which makes the exhaust markedly less efficient, and that it runs smaller valves, which should harm cylinder filling at high rpm, the fact that the current 10 beats the precedong bike at all in the top end is, frankly, jaw-dropping.

Five years ago, Formula Xtreme bikes needed a generous dyno to lay down 165hp, and they'd do it while returning a tank range of 120km. Now, a stock run-in bike from a shop does the same thing. That's insane.

Sun Oct 08, 2006 11:59 am

it's insane in a good-insane kind of way
Post a reply