Compost Pile!!!!

For general Technical and Performance Discussions

Compost Pile!!!!

Postby Yankee » Mon Aug 22, 2005 1:52 pm

Holy Hell!!! (I shoulda taken pics)

I went to quickly take off my engine sprocket cover to check 1st hand how many teeth are on the front sprocket (15, ie: Normal Stock!).... anyway, my cover was harboring a massive amount of grade A garden compost! It had twigs, sticks, dirt, rocks, pebbles, grease, oil, hair, a banana peel and some egg shells stuck in there (okay, the last two i made up)
BUT DAMN, I don't know how the hell the chain was getting through all that crap! :shock:
Has anyone else had a look see inside that thing? Has anyone else discovered what I did?

Also, when putting the newly washed cover back on, I snapped the F@rcken speed sensors attaching bolt!! So it is nicely stuck in the bolt hole.... my drill is charging so that I can drill the F@rcker out, so that i can put the damn thing back on!! Had to go buy a new bolt....

bloody hell!!! :roll: why does nothing ever go right?! oh, while out I finally got myself a 32mm axle nut 1/2" socket to do chain adjusting... as it needed it AGAIN! (and also some cotter pins to lock the axle nut back in place!) 8)
Image
Yankee
Team Ninja
 
Posts: 858
Joined: Fri Nov 05, 2004 9:17 pm
Location: SEQ 4000

Postby NovaCoder » Mon Aug 22, 2005 1:55 pm

Welcome to 3 weeks ago! Yep I had mine off (re my epileptic speedo) and found some really yucky muck hiding there...out with the can of degreaser and toothbrush :P
Motorcycle's are inherently unstable... :twisted:

Race #87 - Blog
NovaCoder
KSRC Member
KSRC Member
 
Posts: 410
Joined: Thu Feb 10, 2005 2:48 pm
Location: Kilsyth, Vic, Oz

Postby Barrabob » Mon Aug 22, 2005 2:00 pm

So what sprocket was in there yankee? it will be a kilo lighter now. :D
If I rode my bike at the speed of light, what would happen when I switched on its headlights?

Image
Barrabob
KSRC Contributor
KSRC Contributor
 
Posts: 1882
Joined: Sat Sep 18, 2004 11:00 am
Location: Brisbane

Postby Yankee » Mon Aug 22, 2005 2:07 pm

it's 100% stock! 15/40 (2.67 final drive ratio)

I also wanted to ask (cuz i can't find it in the book) what is the hex bolt (allen bolt... whatever?!) that sticks out right behind the front sprocket? looks like it adjusts something? Is that the cam-chain-tensioner-adjuster-doova-lacky? I didn't know it was there until i wiped all the muck out!
Image
Yankee
Team Ninja
 
Posts: 858
Joined: Fri Nov 05, 2004 9:17 pm
Location: SEQ 4000

Re: Compost Pile!!!!

Postby ty » Mon Aug 22, 2005 4:32 pm

Yankee wrote:and also some cotter pins to lock the axle nut back in place!

Get an R-clip instead - reusable.
ty
If you have no fear, you're not going fast enough.
Never argue with an idiot. He'll drag you down to his level, then beat you with experience.
User avatar
ty
Team Ninja
 
Posts: 2869
Joined: Thu Apr 22, 2004 9:24 am
Location: Gosford
Bike: Honda
State: New South Wales

Postby mike-s » Tue Aug 23, 2005 12:32 am

Indeed, that's what i've got, definitely worth it.
Image
If it hurts, you aren't doing it right.
User avatar
mike-s
Apprentice Post Whore :-)
Apprentice Post Whore :-)
 
Posts: 6142
Joined: Sat Aug 07, 2004 5:43 am
Location: Arncliffe, Sydney
Bike: Suzuki
State: New South Wales

Postby Aussie Ninja » Tue Aug 23, 2005 7:14 am

Yankee wrote:it's 100% stock! 15/40 (2.67 final drive ratio)

Better go -1 front or or +3 rear. Trust me its worth it :twisted: and you only pick up an extra 500 rpm so around town you can go up an extra cog if you want and on the highway you'll be doing about 5800. :D
Real bravery is being afraid but doing it anyway.
1998 ZX6R R.I.P.
2004 ZX10R killed by Roo.
2011 ZX10R
User avatar
Aussie Ninja
KSRC Regular
KSRC Regular
 
Posts: 833
Joined: Mon Nov 15, 2004 8:00 am
Location: Eastern Creek
Bike: ZX10R
State: New South Wales

Postby Yankee » Tue Aug 23, 2005 7:44 am

yeah... definitely contimplating that!!! prolly the -1 on the front (less rotating mass at the rear, and hell, less weight in general! especially once i cleaned all that shyte out!)
btw- my front sprocket cover now has the plastic speed sensor taped on :evil: :x :evil: :x stupid broken bolt is in there for life :oops: i didn't drill it out quite straight :oops: (easy to do when the smallest drill bit you have is the same size as the bolt) :roll:
Image
Yankee
Team Ninja
 
Posts: 858
Joined: Fri Nov 05, 2004 9:17 pm
Location: SEQ 4000

Postby Aussie Ninja » Tue Aug 23, 2005 8:52 am

Just keep an eye out on ebay for a new cover. They get listed fairly regularly by your countrymen parting out bikes and don't go for much. In fact
http://cgi.ebay.com/ebaymotors/Kawasaki ... dZViewItem
Real bravery is being afraid but doing it anyway.
1998 ZX6R R.I.P.
2004 ZX10R killed by Roo.
2011 ZX10R
User avatar
Aussie Ninja
KSRC Regular
KSRC Regular
 
Posts: 833
Joined: Mon Nov 15, 2004 8:00 am
Location: Eastern Creek
Bike: ZX10R
State: New South Wales

Postby mfzx6r » Tue Aug 23, 2005 9:26 am

Yankee
Go 1 down on the front. Dan and I did well worth it
You need to keep that shit out of the the front sprocket area it will sooner or later damage the seal behind the sprocket and you'll have an oil leak.
With that broken screw you should have tried unscrewing it by using a long thin sharp centre punch and hammer first and if not centre punched the centre of the screw and drilled a small hole and used an easy-out.
If you lived in Vic I'd could have helped but :lol:


mario
Mario
'01 zx6r
klx300r
If it aint "Lime green" it must be a "Lemon"
Friends dont let friends ride Hondas


Image
The most famous KSRC member of all...
Part of the "Fookarwe" tribe
User avatar
mfzx6r
KSRC Addict
KSRC Addict
 
Posts: 3329
Joined: Thu Apr 22, 2004 8:36 am
Location: Lost :-) in melton VIC
Bike: Other Kawi
State: Victoria

Re: Compost Pile!!!!

Postby momomags » Tue Aug 23, 2005 10:02 am

Yankee wrote:Holy Hell!!! (I shoulda taken pics)

Has anyone else had a look see inside that thing? Has anyone else discovered what I did?



Yeah, i think thats normal if no ones ever cleaned it!!!..
Mine was gluggy.. but shes like new now..(wait...hang on a minute) BETTER than new.. :wink:
94 ZXR750
momomags
Newbie
 
Posts: 38
Joined: Wed Jun 15, 2005 11:33 am
Location: Drummoyne Sydney Australia

Postby Yankee » Tue Aug 23, 2005 12:20 pm

cheers all!!!

awesome stuff!!

i will look into E-Bay USA if i really want to fix it 100%, but the taped on plastic sensor is working atm!! :wink: (i've learned aussie-mechanics! that'll be right mate!) as long as it doesn't get sucked in!

yep, gunna go down 1 on the front soon.....
Image
Yankee
Team Ninja
 
Posts: 858
Joined: Fri Nov 05, 2004 9:17 pm
Location: SEQ 4000

Postby robracer » Tue Aug 30, 2005 12:37 pm

Hia yankee hope that bracket is holding up alright.
Mate on both my ZXR 750's when i bought them there was little or no space between the cover & chain from the muck & swamp sh*t that had accumulated...... just goes to show the level of maintaince (lack thereof) of some punters, god knows the bike shop aint going to clean it with a service! :lol:
User avatar
robracer
VIP MEMBER
VIP MEMBER
 
Posts: 15251
Joined: Thu Feb 24, 2005 8:23 pm
Location: Port Macquarie
Bike: ZX6R
State: New South Wales


Return to General Tech & Performance Talk

Who is online

Users browsing this forum: No registered users and 11 guests