Page 1 of 1

WTB rear brake master cylinder GPX750 1984

PostPosted: Wed Dec 28, 2016 10:48 pm
by leep
Hi All

chasing a rebuild kit or master cylinder unit to suit my 1984 GPZ750.

would anyone know of where I could locate one?

cheers

Re: WTB rear brake master cylinder GPX750 1984

PostPosted: Fri Dec 30, 2016 12:36 am
by Mister_T
I've been getting some pattern parts from http://www.wemoto.com.au/ who seem to have a good range of routine wear items. They won't have a master cylinder but are likely to have a front kit.
What they don't have in stock usually comes within a week or two from their mothership in the UK. At the checkout you can see what is in stock and what isn't so you can rearrange you order if necessary.

Re: WTB rear brake master cylinder GPX750 1984

PostPosted: Sun Jan 01, 2017 9:08 pm
by Smitty
leep wrote:Hi All

chasing a rebuild kit or master cylinder unit to suit my 1984 GPZ750.

would anyone know of where I could locate one?

cheers



Fleaby throws up quite a number.. here is one example
Brake Master Cylinder Rebuild Rear for 1988 Kawasaki GPX 750 R
http://www.ebay.com.au/itm/like/3020853 ... 107&chn=ps

Re: WTB rear brake master cylinder GPX750 1984

PostPosted: Tue Jan 03, 2017 2:57 pm
by Mister_T
Going by factory part numbers (as found in places like http://www.cmsnl.com/kawasaki-zx750a2-1 ... ml#results) it seems possible to buy an original piston assembly. Even a bare master cylinder can be found , for a price.

Aftermarket rear kits for a ZX750A2 might be trickier. Some of the ads on eBay can be a bit confusing, like this one for a rear kit for a "1982 GPZ 750 R1": http://www.ebay.com.au/itm/Brake-Master ... SwagdXR3Wl

Then there is this used assembly in the US, which may need kitting anyway: http://www.ebay.com.au/itm/1983-Kawasak ... SwJ7RYSDzJ

Re: WTB rear brake master cylinder GPX750 1984

PostPosted: Thu Jan 05, 2017 12:24 am
by leep
Thanks all for your help, much appreciated.

Ive had zero hits from the local wreckers so the search is on!