History never repeats?

Thanks for the ideas guys! If all goes well I will look to smarten up the front end in the future. For now a few things are starting to come together.

I've stripped the paint from the outside sections of my new rear wheel and it's ready for polishing (before anyone asks the blue is tape protecting the black paint from the paint stripper )

The rear disc arrived from china today so the wheel can go on now

Still awaiting from china:
- rear blinkers
- screen
- fender eliminator

Attachments

ImageUploadedByTapatalk1307584209.336527.jpg (52.93 KiB) Viewed 4412 times

.

Attachments

ImageUploadedByTapatalk1307584487.302562.jpg (41.98 KiB) Viewed 4410 times

.

Attachments

ImageUploadedByTapatalk1307584531.900445.jpg (49.62 KiB) Viewed 4409 times

Nice one Tim

Gday mate - there is a pommy forum called oldskoolperformance.com and they have alot of projects where members streetfighter and turbo bandits and GSX's - they have some cool stuff on there. Might give you some inspiration.

Cool thanks guys

Wheel on
Disc on
New Screen on
New Rear Pads
Plugs Changed
Tank and bowls drained
New Clutch Lever

Went for the maiden 2 minute ride last night: PERFECT!

Got back, pulled up in the driveway and what the farking hell is going on at the front of the engine!?@?@%?$#%^?$#?%?@$?%?%^&?%^?&

It's got the wrong farking headers on it, the oil line to the oil cooler is touching the header and it's dropped all of the oil over the last 500m all over the road, the bike and me.




The prick who owned the bike must have taken a full system off it before the insurance company took it, and he's installed some un-fitting system on it and made a death trap out of a bike, bloody amazing I didn't bin it in the rain both tyres covered in oil!!!

Ahhhhh ok few more steps to go now.....

Last edited by tim on Tue Jun 14, 2011 3:05 pm, edited 1 time in total.

No wonder the rear was spinning up so much powering it up the street in the rain...

Attachments

ImageUploadedByTapatalk1308024219.858511.jpg (55.58 KiB) Viewed 4369 times

Crap

Attachments

ImageUploadedByTapatalk1308024329.431348.jpg (43.31 KiB) Viewed 4368 times

Wrong system, should be a 4 into 1 system and run to the side of the sump. This is a 4 into 2 into 1 and one of the 2 pipes runs UNDER the sump and is touching the sump. No wonder I got caught on the ramp getting the bike onto the trailer.

Attachments

ImageUploadedByTapatalk1308024430.659151.jpg (41.59 KiB) Viewed 4367 times

Last edited by tim on Tue Jun 14, 2011 3:20 pm, edited 2 times in total.

Jezzus Tim you were lucky to get away with that one mate...buy a lotto ticket you lucky bugga

Not wrong, front:

Attachments

ImageUploadedByTapatalk1308025893.194295.jpg (56.86 KiB) Viewed 4361 times

It's a bastard act as far as I'm concerned. Fair enough if the guy wants to take his nice system off before it gets written off, but put something on that isn't gonna kill him or wreck the bike for the poor bugger who tries to get a cheap commuting and pillion bike on the road.

Looks like the full system is mandatory now, there's 2nd hand holeshot and kerker systems in the states on ebay but both have damage..... I'll keep looking I don't have a lot of time up my sleeve to get this on the road with the new nsw laws coming in to stop all re-registering of write offs.

Can anyone comment on the effect the crimping on the headers/link pipe on these systems will have on exhaust flow/performance?

Holeshot
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 0469627671
Kerker K45
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 0501542299

Kerker looks good, bump will polish out

bummer man, id stay away from crimping the exhaust... how about re-running the oil line away from the headers for now?